Switch Cisco CBS250-8P-E-2G-EU 8 Cổng PoE+ 67W, 2 Combo Uplink

– Ports : 48 autosensing 10/100/1000 ports; 4 Gigabit SFP ports. ARM Cortex-A9 @ 400 MHz, 256 MB SDRAM, 64 MB flash; packet buffer: 1.5 MB – Performance : 100 Mb Latency < 7 µs; 1000 Mb Latency < 2 µs; Throughput up to 77.3 Mpps (64-byte packets); Routing/Switching capacity 104 Gbps; Routing table size 32 entries; MAC address table size 16000 – Support : Quality of Service (QoS); Management; Connectivity; Layer 2 switching; Security; Convergence; Resiliency and high availability. – Layer 3 services : Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network; DHCP relay: simplifies management of DHCP addresses in networks with multiple subnets. – Layer 3 routing : NEW Static IPv4/IPv6 routing: provides basic routing (supporting up to 32 static routes and 8 virtual VLAN interfaces); allows manual configuration of routing.

– Ports : 48 autosensing 10/100/1000 ports (24-Ports PoE+, Cống suất tối đa : 370W, port : 30W); 4 Gigabit SFP ports. – Memory and processor : ARM Cortex-A9 @ 400 MHz, 256 MB SDRAM, 64 MB flash; packet buffer: 1.5 MB – Performance : 100 Mb Latency < 7 µs; : 1000 Mb Latency < 2 µs; Throughput up to 77.3 Mpps (64-byte packets); – ——    – Routing/Switching capacity 104 Gbps; Routing table size 32 entries; MAC address table size 16000 – Support : Quality of Service (QoS); Management; Connectivity; Layer 2 switching; Security; Convergence; Resiliency and high availability. – Layer 3 services : Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network; DHCP relay: simplifies management of DHCP addresses in networks with multiple subnets.

• Số cổng LAN: 24 Port với MDI và MDI chéo (MDI-X)
• Tốc độ: 10/100Mbps
• Address Learning and Aging, and Data Flow Control giúp tối ưu truyền dữ liệu.
• Đạt tiêu chuẩn: UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A.
• Thiết kế để bàn hoặc gắn vào Rack.
• Nguồn điện: 110-240VAC, 50-60 Hz.
• Kích thước: 279.4×44.45×170 mm.

– Ports :24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Công suất tổng : 195W, công suất tốt đa mỗi port : 30W – Memory and processor : ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocatedThroughput :up to 35.7 million pps. – Performance : IPv6 Ready Certified; 100 Mb Latency < 7.4 µs (LIFO 64-byte packets); 1000 Mb Latency < 2.3 µs (LIFO 64-byte packets); Throughput up to 41.6 million pps (64-byte packets); Switching capacity 56 Gbps; MAC address table size 16000 entries. – Support : Quality of Service (QoS); Management; Connectivity; Layer 2 switching; Security; Convergence; Resiliency and high availability.

♦ 8 ports 10/100 with 62W power budget + 2 Gigabit copper/SFP combo. – Performance: Switching capacity 5.6 Gbps, Forwarding rate 4.17 mpps wire-speed performance. – Layer 2: Port grouping up to 8 groups, up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation. – Layer 3: IPv4 routing Wirespeed routing of IPv4 packets up to 1K static routes and up to 128 IP interfaces, Classless Interdomain Routing (CIDR) Support for CIDR. – PoE: Power Dedicated to PoE: 62 W, Number of Ports That Support PoE: 8. – QoS (Quality of Service): Priority levels 8 hardware queues, Scheduling Strict priority and weighted round-robin (WRR) Queue assignment based on DSCP and class of service (802.1p/CoS). Mã sản phẩm:  SF352-08P-K9 Tình trạng:Còn Hàng